YU.Premium 3.10

The YU.Premium 3.10 manhole cover for paving is an aluminium base cover with an installation height of 100mm.

The whole is constructed with Yucon profiles ® so that the inner tub rests on the outer frame and there is no tension between the two frames when lifting the inner tub.

An EPDM strip is provided at the bottom of the inner tub as an odour seal.

The cover is a combination of an inner tub and an outer frame that uses the Dis.Cover Technology ® in which the damage-sensitive screw thread and maintenance-requiring bolts were replaced by a magnetically sensitive lifting pin.

This solution is extremely suitable for 'house connection' applications, because it does not use a T-key.

The standard sizes vary from 300 mm x 300 mm to 800 mm x 800 mm. Customisation is possible provided that an adjusted delivery period is observed.

The load-bearing capacity of this ground cover allows for walking-pace traffic of passenger cars, and can therefore be used on a driveway (cf. product sheet).
For detailed material information and properties, we would like to refer you to our enclosed documents that you can download.
But also be sure to view the animations that we provide here (on the right)

A Premium Keybag (cf. accessories) must be provided for each (site) address.