FS.75 Horizontal Inspection Hatch (Model 2)
To facilitate the maintenance of the channels, inspection hatches (or covers) should be provided at the beginning and at the end of the FastDrain configuration.
(Also just before a corner element.)
A FastDrain S.75 inspection hatch is a compound of 3 silver anodised elements:
- A base (including the channel connectors)
- An outer frame
- A covering plate
The combination of the outer frame with the inner tub forms a filling cover ft. 220 x 103mm, and 62mm deep.
The total height of this composition is 132mm, and therefore the same height as the FastDrain channel, which means that it fits in perfectly with the latter.
The horizontal inspection hatch is equipped with a drain connection for a connection with a 50mm pipe.
Because experience shows that using bolts at ground level can be toxic, we use a magnetically sensitive DCT caps in this cover.
In the packaging you will find both the required magnet and an endcap for the channel component.
(Product code 20201200000022)
